Are you searching for a reliable wholesale supplier of
aluminum photovoltaic frames? You are in the right place.
Aluvoltec is a professional
solar panel frames factory based in Cambodia, delivering high-quality, factory-direct
aluminum solar frames to buyers across the globe.
Whether you need standard sizes or fully custom
PV module frames, we supply wholesale quantities with fast lead times, competitive pricing, and certified quality. If your business depends on reliable
solar frame solutions, Aluvoltec is the manufacturing partner you need.
What Are Aluminum Photovoltaic Frames?
Aluminum photovoltaic frames are structural components that hold and protect solar panel glass and cells. Every solar module needs a strong, lightweight frame to survive outdoor conditions for 25+ years. Without a high-quality frame, solar panels lose structural integrity and fail early.
Aluminum solar frames are the global industry standard because they combine:
• Lightweight design — easy to handle, transport, and install
• High strength — supports heavy glass, wind pressure, and snow loads
• Corrosion resistance — performs in rain, humidity, salt air, and heat
• Long service life — 25 to 30 years of reliable outdoor performance
• Full recyclability — supports sustainable solar energy systems
At Aluvoltec, we manufacture
solar aluminum profiles using premium
6063 aluminum alloy — the most widely used grade in the solar frame industry. Every frame we produce meets international solar module standards.
Why Aluminum Is the Best Choice for Photovoltaic Frames
The global solar industry chooses
aluminum solar frames over every alternative material — and for good reason. Here is why aluminum dominates
photovoltaic frame manufacturing worldwide:
| Feature |
Aluminum |
Steel |
Plastic |
| Weight |
Very light |
Heavy |
Light |
| Corrosion resistance |
Excellent |
Poor |
Moderate |
| Strength |
High |
Very high |
Low |
| Lifespan |
25–30 years |
10–15 years |
5–10 years |
| Recyclability |
100% |
Moderate |
Low |
| Cost efficiency |
High |
Moderate |
Low |
| Surface treatment |
Anodized / powder coated |
Painted |
Limited |
Aluvoltec uses
6063-T5 and 6063-T6 aluminum alloy — the industry benchmark for
solar extrusion frames. This alloy delivers the perfect balance of strength, flexibility, and surface finish quality.
Types of Aluminum Photovoltaic Frames We Offer
Aluvoltec produces a complete range of
solar panel frames to match every solar project type. We supply both standard and custom profiles across the following categories:
Solar Long Frames
Used along the long sides of solar modules. We produce
solar long frames in standard lengths or custom dimensions to match your module design exactly.
Solar Short Frames
Used along the short sides of solar panels. Our
solar short frames are precision-cut and punched for drainage holes, grounding points, and corner key slots.
Anodized Solar Frames
Our
anodized solar frames go through an electrochemical anodizing process that creates a hard, permanent oxide layer on the surface. This makes the frame resistant to scratching, fading, and corrosion — perfect for harsh outdoor environments.
Black Anodized PV Frames
For premium all-black solar panel systems, we supply
black anodized PV frames. These are increasingly popular for residential rooftop solar where aesthetics matter as much as performance.
OEM Custom Solar Frames
Every solar module manufacturer has unique specifications. Our
OEM photovoltaic aluminum frames are produced to your exact drawings, dimensions, wall thickness, and surface finish requirements.
Custom Aluminum Photovoltaic Frames for Every Project
At Aluvoltec, we do not just sell standard stock frames. We are a true
solar frame manufacturer that produces
custom aluminum solar module frames from scratch.
Our customization capabilities include: • Profile dimensions — width, height, wall thickness to your exact specs
• Surface treatment — mill finish, silver anodized, black anodized, or powder coated
• Punching & drilling — drainage holes, grounding holes, bonding lugs
• Corner key slots — compatible with all standard corner key systems
• Length cutting — precision cutting to your required module dimensions
• Logo & branding — custom marking available for OEM partners
Aluminum Photovoltaic Frames Specifications & Dimensions
Our
aluminum photovoltaic frames are available across a wide range of standard specifications. Below is a quick reference for our most popular frame profiles:
| Specification |
Details |
| Material |
6063-T5 / 6063-T6 Aluminum Alloy |
| Frame height |
30mm / 35mm / 40mm / 45mm / 50mm |
| Wall thickness |
1.2mm – 2.5mm (custom available) |
| Surface finish |
Mill finish / Silver anodized / Black anodized |
| Anodizing thickness |
10–15 microns (standard) |
| Corner connection |
Corner key slot compatible |
| Drainage holes |
Yes — pre-punched |
| Grounding holes |
Yes — available on request |
| Length |
Custom cut to your module size |
| Tolerance |
±0.1mm on critical dimensions |
| Certification |
ISO 9001 quality management |
All specifications are fully customizable. Send us your module drawings and we will produce
aluminum photovoltaic frames that fit your panels perfectly — first time, every time.
Our Aluminum Photovoltaic Frames Manufacturing Process
Understanding how we make your frames helps you trust our quality. At Aluvoltec, every
solar panel frame goes through a strict multi-step production process:
• Aluminum Billet Preparation — We start with premium 6063 aluminum alloy billets, preheated to the correct temperature for extrusion.
• Extrusion — Heated billets are pushed through precision dies using our 8 high-capacity extrusion machines, creating the exact
solar frame extrusion profile shape you need.
• Cooling & Straightening — Extruded profiles are cooled and straightened on run-out tables to ensure perfect flatness and dimensional accuracy.
• Aging (Heat Treatment) — Profiles go through artificial aging ovens to achieve T5 or T6 temper, delivering the required mechanical strength for
photovoltaic frames.
• Surface Treatment — Profiles go through our 2 anodizing lines. We apply silver or
black anodized finishes to the required micron thickness.
• CNC Machining & Punching — We punch drainage holes, grounding holes, and corner key slots using CNC precision machines.
• Cutting to Length — Frames are cut to your exact module dimensions with tolerances held to ±0.1mm.
• Quality Inspection — Every batch goes through dimensional checks, surface quality inspection, and mechanical testing.
• Packing & Shipping — Finished
aluminum solar frames are carefully packed and shipped worldwide from our Cambodia factory.
Corrosion-Resistant & Lightweight Aluminum PV Frames
One of the most important qualities in any
solar panel frame is its ability to survive harsh outdoor conditions for decades. At Aluvoltec, corrosion resistance is built into every frame we produce.
Our frames resist: • Heavy rain and moisture • Salt air and coastal environments • Extreme heat and UV exposure • Freezing temperatures and snow loads • Industrial pollution and acid rain Our
anodized aluminum photovoltaic frames create a sealed surface layer that locks out moisture and oxidation. This is why our frames perform reliably in Southeast Asia, the Middle East, Europe, and beyond.
At the same time, our
lightweight aluminum solar panel frames make installation faster and easier. A lighter frame means lower shipping costs, faster rooftop installation, and less structural load on mounting systems.
Wholesale Aluminum Photovoltaic Frames for Solar Projects
Aluvoltec is built for wholesale. We supply
bulk solar panel aluminum frames to solar module manufacturers, EPC contractors, solar distributors, and trading companies worldwide.
Our wholesale advantages: • Factory direct — no middlemen, no agent markups
• Large capacity — 8 extrusion machines running full production
• Fast lead times — standard orders shipped within agreed timelines
• Competitive pricing — wholesale rates for all order sizes
• Global shipping — we export to Asia, Europe, Middle East, Africa & Americas
• Complete documentation — all export paperwork handled professionally
Bulk Orders & OEM Aluminum Photovoltaic Frames Available
For solar module manufacturers, OEM production is at the core of what we do. We are a trusted
OEM photovoltaic aluminum frames supplier for factories across Asia and beyond.
What our OEM service includes:
| OEM Service |
Details |
| Custom profile design |
We produce from your drawings or samples |
| Private label |
Your brand, your specs, our production |
| Dedicated tooling |
Custom dies made specifically for your profile |
| Consistent quality |
Same quality batch after batch |
| NDA protection |
Your designs are fully protected |
| Flexible MOQ |
Contact us for minimum order quantities |
If you are a solar panel manufacturer looking for a long-term
solar frame manufacturer partner, Aluvoltec delivers the consistency, quality, and capacity your production line demands.
Factory Direct Pricing on Aluminum Photovoltaic Frames
Buying
factory direct solar aluminum frame extrusion from Aluvoltec means you eliminate every layer of cost between the factory and your business.
Why factory direct saves you money: • No trading company margin
• No agent commission
• No warehouse markup
• Direct communication with our engineering and production team
• Faster problem solving and shorter response times
Our
solar frame extrusion factory Cambodia location gives us a strong cost advantage. Cambodia offers competitive manufacturing costs while maintaining strict quality standards — a combination that is hard to find anywhere else in the world.
We pass these savings directly to our wholesale customers through sharp
aluminum solar frames bulk order price quotes.
Aluminum Photovoltaic Frames for Residential Solar Systems
The residential solar market is growing fast worldwide. Homeowners demand solar panels that look good and last long. Our
aluminum photovoltaic frames for residential solar systems deliver both.
For residential projects we offer: • Standard silver anodized frames for a clean, professional look
• Black anodized PV frames for all-black aesthetic solar systems
• Lightweight profiles for easy rooftop installation
• Frames compatible with all major residential solar panel brands
• Custom dimensions to match your panel design
Our residential
solar panel framing solutions are used by module manufacturers supplying European, Australian, North American, and Asian residential markets.
Aluminum Photovoltaic Frames for Commercial Solar Farms
Large commercial and utility-scale solar projects demand frames that handle extreme loads, large dimensions, and harsh outdoor environments over 25+ years. Aluvoltec manufactures heavy-duty
aluminum photovoltaic frames for commercial solar farms that meet these demands.
For commercial & utility projects we supply: • Heavy wall thickness profiles for high wind and snow load environments
• Large format frames for 600W+ bifacial solar modules
• High-volume bulk supply to match large project timelines
• Frames tested to IEC 61215 and IEC 61730 solar panel standards
• Anodized surface treatment for maximum outdoor durability
• Full material certifications and test reports available
From 10MW rooftop projects to 500MW ground-mount solar farms, our
Cambodia solar frames factory has the capacity and capability to supply your project on time.
Why Choose Aluvoltec as Your Solar Panel Frames Factory?
There are many
solar frame manufacturers in Asia. Here is why leading solar companies choose Aluvoltec as their long-term supply partner:
Advanced Manufacturing Capacity
• 8 aluminum extrusion machines • 2 professional anodizing lines • CNC machining and punching equipment
• Full in-house quality testing lab
Premium Material Quality
• 6063-T5 / T6 aluminum alloy — industry standard
• Anodizing thickness up to 15 microns
• Tight dimensional tolerances ±0.1mm
True Factory Direct Supply
• No agents, no middlemen
• Direct factory pricing on all orders
• Fast, transparent communication
Global Export Experience
• Customers across Asia, Europe, Middle East, Africa, and the Americas
• Professional export documentation
• Reliable logistics partnerships
Full Customization
• Custom profiles from your drawings
• OEM production with NDA protection
• Any size, any surface finish, any quantity
Sustainable Manufacturing
• Cambodia-based factory with growing green manufacturing practices
• 100% recyclable aluminum materials
• Committed to supporting the global clean energy transition
Request a Free Wholesale Quote for Aluminum Photovoltaic Frames
Getting a quote from Aluvoltec is fast and simple. Our team responds quickly with pricing, lead times, and full product specifications.
To get your quote, please share: • Frame dimensions — width, height, wall thickness
• Surface finish — mill finish, silver anodized, or
black anodized PV frames • Required quantity — per month or per order
• Delivery destination — port or country
Contact Aluvoltec Today
Email: info@aluvoltec.com
WhatsApp: +86 151 6164 7752
Website: aluvoltec.com |
